Showing posts with label Viking. Show all posts
Showing posts with label Viking. Show all posts

Monday, March 29, 2010

What's a Saltwater Swimming Pool?

Chlorination has been the traditional method of pool sanitation for decades almost by default, since there were no alternatives for this crucial aspect of owning a swimming pool, However, for many pool owners, chlorination is an old and outdated pool sanitation method they’ve discarded in favor of maintaining a saltwater pool.


Chlorine


So what’s the problem with chlorine, anyway? It does exactly what is needs to - kills algae and bacteria, keeping the pool attractive and more importantly, a safe and sanitary place to swim. A pool that doesn’t get regular chlorine treatments will quickly become clogged with thick green algae. Depending on where you live, and especially in warmer months, an untreated pool can become a green, sludgy nightmare inside a week - the chlorine is definitely important. If you maintain a chlorinated pool, it’s not enough to dump chlorine in periodically and let the pool fend for itself. There are other chemicals to add too, as well as regular testing to keep an eye on water quality. For example, you must make sure there is enough free available chlorine (meaning chlorine that is active) in the water to keep up with sanitizing the water. This is usually done with the use of chlorine tablets. Another important aspect of this maintenance is pH levels - the acidity or alkalinity of the water. If the pH gets too high, the chlorine in the pool isn’t able to work as effectively. However if the pH drops too low, the water quickly becomes too acidic to swim in comfortably. Keeping the pH at the right level is somewhat difficult because the range at which it’s “just right” is very narrow and many factors, including rain, affect this. Chlorine is important for sanitation, but for many people it’s also a source of irritation. The harsh chemicals that are added to prepackaged pool chlorine irritate the skin and eyes, making swimming a highly unpleasant experience. It is important to note that it’s not the chlorine that’s the problem - in most cases it’s the chemicals which are added to the pre-packaged mix.



Salt Water


The main advantage of a salt water pool isn’t that it doesn’t use chlorine. In fact, a salt water pool does use chlorine to keep the water clean. The advantage is that the pool owner doesn’t add chlorine to the pool - that means no prepackaged chlorine and less irritation for people who are sensitive to the added chemicals. Salt water tends to be much softer than chlorinated water, so it’s much more pleasurable to swim in. In addition, a salt water pool usually has a much lower concentration of chlorine than a chlorinated pool. Another important benefit is more of a long-term one. In the short term, converting from chlorine to salt water will involve some cash outlay, since there are a few system components you will need to buy. It will run approximately $1500 - $2000 to convert a traditional chlorine system to a salt water system. Over two or three years, however, the money you spend is recouped due to not having to buy additional chlorine for your pool. Just a bag of salt which is much less expensive. Just to be clear though, salt water pools do in fact use chlorine to sanitize the pool water. So if you’re not adding chlorine tablets or shock, how does that work? It works because of the chemical composition of salt, which is made up of chlorine and sodium. Within the salt water system is a unit called a salt-chlorine generator, which uses electrolysis to generate chlorine by separating the sodium and the chlorine molecules in the salt you add to the pool. As the generator unit separates out the chlorine its returned to the pool where it keeps the water clean and sanitary. A well-maintained salt pool is an absolute dream to swim in, with softer, more comfortable water that doesn’t irritate. It doesn’t taste salty either, as you might think, because is has such a low concentration of salt that’s officially considered to be fresh water! In the ocean, the salt concentration is between 20,000 and 35,000 parts per million, whereas in a salt water pool, it’s just 2,600 - 3,200 parts per million. Finally, don’t be fooled into thinking that a salt water pool maintains itself. It doesn’t. You still need to check pH levels and carry out other maintenance task. However, you’ll benefit from lower maintenance costs, ease of operation and a more enjoyable swimming experience, which definitely makes it worthwhile.




Submitted By:


Splash Pools

Sunday, March 21, 2010

What exactly is a Saltwater Swimming Pool?


Chlorination has been the traditional method of pool sanitation for decades-almost by default, since there were no alternatives for this crucial aspect of owning a swimming pool. However, for many pool owners, chlorination is an old and outdated pool sanitation method they’ve discarded in favor of maintaining a salt water pool.

CHLORINE

So what’s the problem with chlorine, anyway? It does exactly what it needs to-kills algae and bacteria, keeping the pool attractive and more importantly, a safe and sanitary place to swim. A pool that doesn’t get regular chlorine treatments will quickly become clogged with thick green algae. Depending on where you live, and especially in warmer months, an untreated pool can become a green, sludgy nightmare inside of a week-the chlorine is definitely important.

If you maintain a chlorinated pool, however, it’s not enough to dump chlorine in periodically and let the pool fend for itself. There are other chemicals to add too, as well as regular testing to keep an eye on water quality. For example, you must make sure there is enough free available chlorine (meaning chlorine that is active) in the water to keep up with sanitizing the water. This is usually done with the use of weekly chlorine tablets.

Another important aspect of this maintenance is PH levels-the acidity or alkalinity of the water. If the PH gets too high, the chlorine in the pool isn’t able to work as efficiently. However, if the PH drops too low, the water quickly becomes too acidic to swim in comfortably. Keeping the PH at the right level is somewhat difficult, because the range at which it’s ‘just right’ is very narrow and many factors, including rain, affect this.

Chlorine is important for sanitation, but for many people it’s also a source of irritation. The harsh chemicals that are added to pre-packaged pool chlorine irritate the skin and eyes, making swimming a highly unpleasant experience. It is important to note that it’s not the chlorine that’s the problem-in most cases it’s the chemicals which are added to the pre-packaged mix.

SALT WATER

The main advantage of a salt water pool isn’t that it doesn’t use chlorine. In fact, a salt water pool does use chlorine to keep the water clean. The advantage is that the pool owner doesn’t add chlorine to the pool-that means no pre-packaged chlorine, and less irritation for people who are sensitive to the added chemicals. Salt water tends to be much softer than chlorinated water, so it’s much more pleasurable to swim in, and is much less harsh on your skin. In addition, a salt water pool usually has a much lower concentration of chlorine than a chlorinated pool.

Another important benefit is more of a long-term one. In the short term, converting from chlorine to a salt water pool will involve some cash outlay, since there are a few system components you’ll need to by. It’ll run approximately $1400-$1800 to convert a traditional chlorine system to a salt water system. Over two or three years, however, the money you spend is recouped due to not having to buy extra chlorine for the pool. Just a bag of salt which is much less expensive.

Just to be clear though, salt water pools do in fact use chlorine to sanitize and the water. So if you are not adding chlorine tablets or shock, how does that work?

It works because of the chemical composition of salt, which is made up of chlorine and sodium. Within the salt water system is a unit called a salt-chlorine generator, which uses electrolysis to generate chlorine by separating the sodium and chlorine molecules in the salt you add to the pool. As the generator unit separates out the chlorine, it’s returned to the pool, where it keeps the water clean and sanitary.

A well-maintained salt pool is an absolute delight to swim in, with softer, more comfortable water that doesn’t irritate. It doesn’t taste salty, either, as you might think, because it has such a low concentration of salt that it’s officially considered to be fresh water! In the ocean, the salt concentration is between 20,000 to 35,000 parts per million, whereas in a salt water pool, it’s just 2,600 to 3,200.

Finally, don’t be fooled into thinking that a salt water pool maintains itself. It doesn’t. You still need to check PH levels and carry out other maintenance tasks. However,you’ll benefit from lower maintenance costs and a more enjoyable swimming experience, which definitely makes it worthwhile.



Submitted By:

Splash Pools


Monday, February 22, 2010

Splash Fiberglass Pools to Begin Maryland Spring Home Show Schedule

It's about that time again for us to gear up for the Maryland Home Show Season. Splash Pools of maryland has a full schedule this year and hopes to see all of our followers there. This year we have the following events firmly in our spring schedule:

Maryland Home & Garden Show
March 6-7 & March 12 - 14
At the Maryland State Fair Grounds
Timonium, MD
We will have a Cape Coral on display so you can see up close the quality of a Viking Pool. We will have our knowledgeable staff there to answer any questions you have and show you all the new options we have to offer in 2010. We have a limited number of complimentary tickets so contact us for your free tickets by e-mail James@splashpoolsmd.com or by phone 410-766-9663.

Carroll County Home Show
April 10 - 11th
Carroll County Fair Grounds
Westminster, MD


Splash Into Spring Event
April 24 - 25th
Kendalls Hardware Store
Clarksville, MD


Submitted By: Splash Pools

Splash Fiberglass Pools of Maryland serves all of Maryland, Baltimore, Washington DC and Northern Virginia. We specialize in the installation of Viking Fiberglass Swimming Pools and Complete Concrete Swimming Pool Installations and Renovations including Maryland Fiberglass Pools, Tile and Coping, Natural Stone and Paver Decking, Pool Resurfacing with Pebble Tec. Visit Splash Fiberglass Pools of Maryland at www.SplashPoolsMD.com or Contact us at Info@SplashPoolsMD.com or (443) 766-9663.



Wednesday, February 10, 2010

Splash Pools presents New Viking Fiberglass Pool Colors for 2010

Take a look at the New Viking Fiberglass Pool Colors for 2010. These colors can be added to any of the pool or spa models.


Diamond Series Pool Colors

The new Diamond Series adds deep, rich color to the pool's finish. Choose from Azure, Maya and Persian to enhance the
sparkle of your pool.

DIAMOND SERIES

Diamond Series - AzureDiamond Series - Azure Spa
Diamond Series - Maya Diamond Series - Maya Spa
Diamond Series - Persian Diamond Series - Persian Spa


Submitted By: Splash Pools

Splash Fiberglass Pools of Maryland serves all of Maryland, Baltimore, Washington DC and Northern Virginia. We specialize in the installation of Viking Fiberglass Swimming Pools and Complete Concrete Swimming Pool Installations and Renovations including Tile and Coping, Natural Stone and Paver Decking, Pool Resurfacing with Pebble Tec. Visit Splash Fiberglass Pools of Maryland at www.SplashPoolsMD.com or Contact us at Info@SplashPoolsMD.com or (443) 766-9663.

Concrete Swimming Pool Renovations

Is your concrete swimming pool starting to show it's age? Does your once stunning backyard oasis no longer receive compliments from your friends and family? Then it's probably time for a swimming pool renovation.

Let's break down the most common items addressed during a swimming pool renovation:

1. Interior Surface: The interior surface of your concrete swimming pool is either coated with plaster / marcite or paint. Plaster and Marcite are interchangeable terms for the same product. If the surface is rough, discolored, pitted, chipping, delaminating or just outdated it's time to replace it. The process involves removing the existing surface by manually chipping it off down to the concrete or if it's still structurally sound they can just cut out around all the fittings and tiles. Next the surface is acid washed to make the surface as rough as possible for the new surface to adhere to. Finally the new surface is installed. Your choices are practically endless and include: White Plaster, Colored Plaster, Quartz Aggregate, Pebble Tec, Beadecrete or an all tile pool. Basically the White and colored plaster are the most economical but carry the shortest warranty (usually 1 year) and are the most affected by poor water chemistry. Quartz aggregate finishes are more durable and fall in the mid-range price matrix and usually carry a 1-5 year warranty depending on the product. Pebble Tec, Beadcrete and all pebble finishes are by far the most durable most carrying a 5 - 15 warranty but are typically twice as expensive as a standard white plaster. If you are looking for the Rolls Royce of pool finishes then you are in the market for an all glass tile swimming pool. These are highly custom finishes and start around $50,000 for the finish alone and we have installed some in excess of $300,000. You must be able to appreciate your pool as a piece of artwork and no longer a utilitarian object.

2. Tile and Coping: This is the portion of the pool along the edge and where the waterline meets the wall. Tile and coping is generally replaced every 8-10 years due either to maintenance requirements or aesthetic purposes. The days of "pool blue" water line tile and brick coping are gone. Pool owners are now looking for a more dynamic look with mosaic and glass tile waterlines with natural stone coping. Generally pool owners complete the tile and coping at the same time as the pool resurfacing. This minimizes redundant costs associated with both items.

3. Deck and Patio: After time your deck or patio will start to show the signs of age. Due to freeze / thaw conditions your deck can start to heave, crack, discolor and spall. Or maybe you just have additional space needs. The easiest and least expensive way is to have an overlay system applied to the existing concrete. This could involve an acid stain, Kool Deck, acrylic deck stain, etc. These topical coatings can refresh the look of you pool but will not fix structural issues or cracks. Realistically, it doesn't cost that much to have your existing deck removed and a new one installed. Once the deck is removed you can choose any material you want. Plain Concrete, Colored Concrete, Stamped Concrete, Pavers and Natural Stone are a few of the options to choose from.

4. Equipment Upgrades: If your equipment is more than 5 years old than most of the components are outdated and energy hogs. I recommend that EVERYONE replace their current pump with a Variable Frequency Drive Pump. We recommend the Pentair Intelliflow Pump. This pump will save you about 60% on energy consumption and they run about 80% quieter than a standard pump. Heaters are another energy hog that have had large efficiency upgrades in the past 5 years.

5. Outdoor Kitchens & Fireplaces: These are the two items that we are installing with almost almost every renovation we complete. Complete outdoor living is the goal of most of our clients. By installing an outdoor kitchen and fireplace you have extended your outdoor living season by at least four months. There's nothing better than cooking out and then sitting around a fire in your backyard with friends when the temperature starts to fall to the Lower 50's at night.

6. Landscaping: Most new pool owners spend their entire budget on the pool and hardscaping but generally neglect the landscaping portion of the project. Get a professional landscape plan and stick to it. Don't let the landscaper fool you...a one gallon plant will not grow 5 feet in one year. Spend a little more up front and get larger plants so you won't have to spend 5 years nurturing your landscape to get the look you were hoping for.



Submitted By: Splash Pools

Splash Fiberglass Pools of Maryland serves all of Maryland, Baltimore, Washington DC and Northern Virginia. We specialize in the installation of Viking Fiberglass Swimming Pools and Complete Concrete Swimming Pool Installations and Renovations including Tile and Coping, Natural Stone and Paver Decking, Pool Resurfacing with Pebble Tec. Visit Splash Fiberglass Pools of Maryland at www.SplashPoolsMD.com or Contact us at Info@SplashPoolsMD.com or (443) 766-9663.




Sunday, February 7, 2010

Turning Your Swimming Pool "Green"

Everywhere you look more and more people are going green when it comes to their household purchases. Splash Fiberglass Pools of Maryland is taking the green movement by storm with the introduction of "Green" products for your swimming pool.


The old standard residential swimming pool uses an alarmingly high amount of energy to run. With the cost of pools going down and more and more people jumping on board the swimming pool bandwagon, going Green is really the only way to go.


According to Green Living Online, "With just over eight million Pools in the U.S. and more than 600,000 in Canada, there is a growing awareness that residential pools may not be the most environmentally friendly form of recreation." They use a lot of electricity and gas with pumps to circulate the water through filters and heaters, typically running 24 hours a day. This is unnecessary when the average pool owner only spends about an hour a day swimming.


Splash Pools is aware of this and is in full swing with a variety of Alternative and Low Energy Efficient products for pool owners looking to "Go Green". According to their website this, "Maryland based swimming pool design and construction company encourages the use of environmentally responsible swimming pool products by incorporating healthy, resourceful, energy-efficient products, materials, and methods in the design and construction of swimming pools"


Going Green with your swimming pool is not just a hot trend, it will save you money. They offer products such as the Pentair Intelliflow Variable Frequency Swimming Pool Pump that will reduce energy costs by at least 60% utilizing its internal electrical design system and self-adjusting pool filter run-times year-round. Pool Owners' can become less dependent on high output products using outdated technologies. They can upgrade to more environmentally friendly, cost saving, "Green" products.


According to the Splash Pools, "Almost every manufacturer has developed enhanced products with low Amperage or Solar pumps to decrease energy bills from homeowners and to increase the value of homes living green," says James Zoller of Splash Pools.


Even if you don't live in Ellicott City, Maryland you can check out their website for updated consumer information and Energy Saving tips for pool owners.


With Americans jumping on the green living Bandwagon they are preparing to see a huge increase in consumer actions searching for Energy related Pool products.



Submitted By: Splash Pools

Splash Fiberglass Pools of Maryland serves all of Maryland, Baltimore, Washington DC and Northern Virginia. We specialize in the installation of Viking Fiberglass Swimming Pools and Complete Concrete Swimming Pool Installations and Renovations including Tile and Coping, Natural Stone and Paver Decking, Pool Resurfacing with Pebble Tec. Visit Splash Fiberglass Pools of Maryland at www.SplashPoolsMD.com or Contact us at Info@SplashPoolsMD.com or (443) 766-9663.

Sunday, December 27, 2009

Best Winter Swimming Pool Safety Cover - What's the Difference?

Splash Pools provides Fiberglass Swimming Pools in Maryland and will explain about Swimming Pool Safety Covers.


1. What's the difference between a regular swimming pool cover and a swimming pool safety cover?

A typical solid vinyl pool cover is little more than a tarp to put over your swimming pool. It does not prevent children or pets from gaining access to the pool. All safety covers must conform to the Standard Performance Specification set by the American Society for Testing and Materials (ASTM). According to the ASTM, a safety cover must be able to support a certain amount of weight, not permit gaps that a child or pet could squeeze through, and remove standing water. A pool cover can not include the word "Safety" unless it meets these standards.

2. Why is a U.L. (underwriters laboratories) approval important?
(By the way, we resurfaced the U.L. test pool in 2008)

Underwriters Laboratories (known as U.L.) is an outside testing company. Many cover company's claim that they meet the ASTM standard F1346-91 for manual safety covers, but have not followed up with outside testing agencies that perform all of the actual tests listed in the ASTM guideline. At at Splash Pools we only install covers that not only meet but also exceed the guidelines set forth for safety swimming pool covers! For example, we only install covers that use double perimeter webbing and double-thick straps, extremely high-strength 302 grade stainless steel springs, and polyester bonded thread that costs almost 10 times more than the thread used by some of our competitors.

3. Can my children walk and play on the safety cover?

All Splash Pools covers meet the ASTM guidelines for safety covers and have been U.L. certified. As such they will easily support the weight of a child or an adult in an emergency. However, we do not recommend walking on the cover, and children and pets should never be allowed to play on top of a safety or any other type of pool cover. Adult supervision is always required around any swimming pool area.


4. Should I get a mesh or a solid safety cover?

Both the mesh Safety Swimming Pool Cover and our solid Safety Swimming Pool Cover provide superior protection for your family. Mesh covers do have one safety advantage: they do not permit water to collect. In order to meet safety cover performance standards, solid covers must provide for the elimination of standing water. Our solid safety cover is available in two versions: one with "invisible" mesh panels that allow water to drain through, and an all-solid version that is always sold with an automatic cover pump. The pump must be used at all times in order to maintain the safety of the cover. Ultimately, though, the choice between a mesh or solid cover is up to the preference of the user.


5. Why does the water have to be removed from the cover in order for it to be considered "safe"?

Collected water on a cover is a hazard in itself. There have unfortunately been cases of children and pets who have wandered out on a cover filled with water and slippery debris, become trapped and drowned. That is why the ASTM Performance Specification states that no pool cover can call itself a safety cover if it does not provide for water removal.

6. What type of warranty do your covers come with?

Currently our mesh and solid safety covers come with a 12-year pro-rated manufacturer's warranty. When completed and signed by the original purchaser, this warrants that the cover is free from defects in material and workmanship under normal use.


7. Should I drain my pool before putting on my swimming pool safety cover?

No! It is very important to maintain proper water level to help support the weight of the cover and prevent excess wear. For mesh covers, water level should be 15" to 18" below the top of the pool. For solid covers, water level should be 12" to 16" below the top of the pool. If proper water level is not maintained, the warranty can be void.


8. I have a custom-designed pool that's irregularly shaped. Can I get a LOOP-LOC safety cover that will fit it?
Absolutely! Splash Pools will first come out and carefully measure your pool. Then, the manufacturer will use their exclusive computerized design system to translate those measurements into a cover that will perfectly conform to the shape and features of your pool.


9. How long will it take to get a custom cover?
From the time Splash Pools submits your order to the manufacturer it will take approximately 2-3 weeks including fabrication until the cover is completely installed on your pool.


10. I always supervise my children when they are around our pool. Why do I need a safety cover?
A swimming pool is always a magnet for children. At times when you are not around to supervise or your family is away from home, wandering children and pets from the neighborhood may attempt to enter your pool. Even if you have a locked gate (which is a great extra layer of protection), a determined toddler will often be able breach it. Only the security of a safety cover can ensure that no one will be able to gain access to the pool while you are away.


11. How can I keep my pool water clear over the winter months?

All pools, when covered (no matter what type of cover you have), require winter chemical treatment to keep the water clear. When closing your pool in the fall, we recommend use of a winterizing chemical kit, which includes winterizing algaecide.


12. If we have a paver/brick deck can we use a Swimming Pool Safety Cover?

Absolutely! Splash Pools anchor-in-pipe installation is the perfect application for paver/brick decks. The pipe holds the anchors firmly into place allowing the cover the remain taut all winter long. No wear and tear on the deck, will not pull or ruin pavers/bricks whatsoever.




Submitted by: Frank Bowman

Frank is one of the Founders of Splash Pool of Maryland. Splash Pools specializes is Viking Fiberglass Swimming Pools and installs them in Maryland, Washington DC and Northern Virginia. Frank has been recognized as a subject matter expert by the APSP and has been retained to speak at various events including the International Pool and Spa Expo, Coverings, NCHBA, World of Concrete, Watershapes and various other local events.

Friday, December 25, 2009

Fiberglass Swimming Pool Myths


Unfortunately, there are some serious fiberglass swimming pool myths regarding the potential drawbacks of owning a fiberglass swimming pool. We at Splash Pools of Ellicott City, North Carolina will try to address and alleviate these so-called issues.

Fiberglass Pool Myth #1

Fiberglass Pools Will Float or Pop-Up:

This is one of the most amusing of the myths and misconceptions we've heard regarding fiberglass pools. If anyone (especially another pool dealer) tells you that fiberglass pools pop out of the ground, then they are simply being dishonest and trying to use fear as a means of motivating you to get another type of pool.
There is a local company (we will not mention any names here) that loves to tell homeowners that every time there is a hurricane or heavy rain in the area, fiberglass pools all over the place float up out of the ground. We personally called this company once and asked them to give us just one name of someone who had a pool float, and of course they were unable to give us such information.

During our years of swimming pool building in Maryland, Washington DC, Northern Virginia and North Carolina we have never had a pool float after installation. This is because not only are the pools always full of water, but the concrete deck engulfs the pool's outer lip, making it impossible for the pool to move unless the concrete deck moves with it. Additionally, Splash Pools installs a drainage system below every Viking Fiberglass Pool that we install making it impossible for the swimming pool to "float" under ANY condition. Please don't be fooled by anyone who uses this ploy as a means to push you in a different direction.

Fiberglass Pool Myth #2

Fiberglass Pools Look Cheap:

Had someone said this 15 years ago, I would have agreed with such a statement. Now, however, this is just another fiberglass pool myth. Times have changed in the fiberglass industry, especially with the introduction of cantilever concrete coping, colored pool finishes, waterline tile, mosaic inlay tile, fiber-optic lighting, water features, etc, etc. With so many options and features to choose from, homes of all value ranges can easily find a pool that corresponds aesthetically with their appearance. When we show pictures of the pools we have installed to customers, we often get asked if they are seeing concrete pools. This is because fiberglass pools are now very beautiful and permanent looking. This is also why customers of all economic classes (we have installed many pools where the home value is well over 2 million dollars) are going with the fiberglass advantage.

Fiberglass Pool Myth #3

Fiberglass Pools Only Work in Warm Climates:

This fiberglass pool myth really makes no sense at all! It is an accepted fact in the swimming pool industry that fiberglass has the ability to "flex" due to its incredible tensile strength, much more so than any other type of permanent pool (i.e. concrete). Moreover, when people are concerned about freeze conditions having an adverse affect on fiberglass, they are forgetting that when the water in a pool freezes, it expands in an upward direction (where there are no barriers). But the simple fact is that we have never had even one customer sustain any damage to their fiberglass shell due to freezing weather conditions. Again, this statement is easily verifiable with our customer reference list.


Fiberglass Pool Myth #4

Fiberglass Pools are Much More Expensive than Vinyl Liner Pools:

The answer to this fiberglass pool myth is a little tricky, but hopefully we'll be clear here. Typically, if someone is comparing a fiberglass pool to a liner pool - apples to apples, features with features - they will find that a fiberglass unit typically runs 5-10k more, initially. We say initially, because when considering the cost of a pool there are two different ways to arrive at the number.

The first way is by solely looking at the initial cost of the project. The second, unlike the first method, takes the initial price but also adds the expenses of the pool over the course of its lifetime.

For example, let's say you spend $25,000 initially for a vinyl-lined pool. Considering the liner will typically last 8 years on average (this number can be more or less depending on a variety of factors) before it has to be replaced, and the average cost of a liner replacement is usually between 3-5k, a pool owner could easily spend 8-12k on liner replacements alone during the first 20 years of the pool. The same principle is applicable to concrete pools who have to be replastered (every 8-12 years), where the average cost for this service is well over 5k. This is one of the great beauties of a fiberglass pool.

There are almost never any large expenses down the road for a homeowner to worry about. When a potential pool buyer figures in the cost of long term repairs/expenses, as well as the year-to-year savings on chemicals, it is no wonder why so many consumers are willing to pay more initially for a fiberglass pool in order to pay less and have less headache in the long run.

I hope this aided you in sorting out the Myths from the Facts of Fiberglass Swimming Pools. Please feel free to let us know if you would like us to cover any additional subjects.



Submitted By: Frank Bowman

Frank is the Co-Owner of Splash Pools based in Ellicott City, Maryland. Splash Pools specializes in Viking Fiberglass and Custom Concrete Swimming Pools and Spas in Maryland, Washington DC, Baltimore and Northern Virginia . Providing discussions about fiberglass swimming pool myths, Saltwater Chlorinators, Infinity Edge Pools, Fiberglass Pool Prices, Variable Drive Pumps, Pool Renovations and ceramic composit pools

Wednesday, December 23, 2009

Control Your Swimming Pool From Your iPhone or iPod Touch

Technology has been progressing at such a rapid pace that it's hard to keep up with it and Swimming Pool Automation is no exception. Splash Pools of Ellicott City, Maryland is on the cutting edge of fiberglass Swimming Pool design & construction and now offers complete control of your entire outdoor living environment through your iPhone or iPod Touch. Controlling pool and spa operations couldn't be easier...or more convenient. Once the software is installed, you can control everything from pool and spa temperatures, jets, lighting, water features, remote video monitoring, and more...right from an iPhone or iPod touch. Imagine being able to:

Easily turn on spa and adjust the desired temperature on the way home from work.

Control all circuits (waterfalls, pool lights, fountains, and more) and review history of temperature, pool/spa, heater, and light operation.

Remotely view live video on up to 4 video cameras.

Combine this with a Saltwater Chlorination System and you have a near maintenance free swimming pool that can completely be controlled and monitored from anywhere in the world. Contact us if you have any additional swimming pool automation questions.



Submitted By: Frank Bowman

Frank is the Co-Owner of Splash Pools based in Ellicott City, Maryland. Splash Pools specializes in Viking Fiberglass Swimming Pools and Spas in Maryland, Washington DC and Northern Virginia. Providing discussions about Saltwater Chlorinators, Infinity Edge Pools, Fiberglass Pool Prices, Variable Drive Pumps, Pool Renovations and ceramic composit pools

Thursday, December 17, 2009

Splash Pools was founded upon the premise that "Excellence is the choice between two alternatives." We used this phrase to rocket our firm to the forefront of aquatic design, customer service and high quality construction. Our passion for pools is apparent to anyone who meets us and our enthusiasm is instantly contagious.

Splash Pools Owners, James Zoller and Frank Bowman were both born and raised in Ellicott City, Maryland. They first met in Kindergarden at West Friendship Elementary School and grew up together as best friends. After their early years in Howard County, their life paths headed in different directions.

James went on to earn a degree from Virginia Tech University and then returned home to live on their family farm in Howard County. James began his career with a National Crane Company where he earned numerous sales and customer service awards and recognitions but he was always looking for something more. That is why he founded his first company Residential Solutions, LLC. Residential Solutions is a turn-key home improvement company specializing in outdoor living installations including stone and paver patios, outdoor kitchens & fireplaces, landscaping, lighting, irrigation, screened porches, decks, as well as interior renovations. This company has been a great success and has seen explosive growth over the past 5 years.

Frank traveled a little further south to earn a degree from North Carolina State University and continues to live in Wake Forest, NC. After College Frank started his first company that provided management services to community, apartment and country club swimming pools including staffing, maintenance, chemicals and renovations. Frank decided that the design and construction portion of the business was his true passion so he sold the management company and started building swimming pools. His current company, Frank Bowman Designs, prides itself on world class quality and design. Their average residential projects range between $250K - $600k with their largest residential project reaching over $2.5 mil. Frank has been retained as a subject matter expert to speak at the International Pool and Spa Expo, Coverings (international Tile Expo), Regional and Local Manufacturer Events and his work has been featured on many TV, Newspaper, Magazine and Print Media.

The combined resume of these two lifelong friends equals just one thing...Exceptional Outdoor Living Environments, built to the highest standards, with the best products available. So they decided to open Splash Pools providing "Excellence with a Splash of Style." After countless days, weeks and months performing a complete investigation of all the fiberglass pool companies in the nation we decided to partner with Viking Fiberglass Pools. Viking was the best match for our business model as they strive to be on the forefront of design, technology and warranty. They are the standard that all other fiberglass pool manufacturers try to achieve and constantly raise the bar within their industry.

Now that you know a little about us, please follow our blog as we will routinely update it with industry news, pool tips, offers and discounts and any other pool related questions you may have.



Submitted by: Frank Bowman

Frank is one of the Owners of Splash Pools, LLC. Splash Pools is the premier Viking fiberglass swimming pool dealer for Maryland, Washington DC and Northern Virginia. You may visit their website at www.SplashPoolsMD.com, call them at 443.766.9663 or email them at Sales@SplashPoolsMD.com