How To Properly And Easily Maintain Your Pool

After Splash Fiberglass Pools of Maryland completes your new Backyard Oasis, you have to decide on the best way to maintain it so that stays clean, safe, and fun for everyone to enjoy. The easiest way to maintain your swimming pool is to hire a reliable pool maintenance professional to do most of the maintaining for you. Ask your friends, neighbors, and family who own pools for their recommendations and remember that you're looking for someone who is trustworthy, thorough, and responsible. After shopping around and considering your options, you'll be able to decide which service will best meet your needs.

If you prefer to maintain your pool yourself or if you want to be sure that the pool maintenance professional you've hired properly cares for your pool, you will need to adhere to a maintenance schedule. The following is a good guide.

The Essential Pool Maintenance Guide

WEEKLY MAINTENANCE:

• Brush* the entire surface of the pool, including any tiled areas.
• Manually vacuum* or brush any dirt and debris, which has not already been removed by your cleaning system, toward the main drains.
• Net any debris off the surface of the pool water.
• Clean out the skimmer and pump baskets.
• Check the filter pressure to determine if backwashing or cartridge cleaning is necessary.
• Test the levels of chlorine, pH and alkalinity.
• If the pool has a chlorinator, check the level of chlorine and add as needed.

FILTER MAINTENANCE:

• Cartridge Filters: When the pressure gauge increases 10 psi, tear down the filter by removing the cartridge element. Clean thoroughly.
• D.E. Filters: Every 6 months, or whenever pressure gauge reads "dirty," tear down the filter by removing the grids. Clean thoroughly.

BEYOND WEEKLY MAINTENANCE:

• Every month, the ceramic tile and grout should be cleaned using a tile cleaning solution.
• Every month, if the pool has a salt chlorinator, check the salt content level.
• Every month, the mastic should be inspected for cracks and separation. Repair or replace any damaged mastic.
• Every 12 months, have a complete pool water analysis done by a professional pool company.
• When necessary, "super chlorinate" or "shock" the pool water after heavy usage or a heavy rainstorm.

• Brushing Your Pool

Brushing in an important part of the initial "new pool" cleaning process but, even after your pool is clean (and even if you own an automatic cleaning system), it is important to occasionally brush your pool to remove the dirt that will adhere to the wall and floor. When brushing your pool, start at the top of the walls on the tile line and work your way down to the bottom of your pool or spa. Using steady, firm strokes, always brush the dirt toward the recirculating drain, overlapping your brush strokes.

• Using Your Vacuum Cleaner
  

Many pools may not require a vacuum cleaner when an automatic cleaning system is installed, however, there are always those special times when heavy use of the pool, wind storms or children throwing dirt or debris into the pool may overtax the cleaning system. The vacuum works as part of the filter system and is attached through the skimmer. The pool water, along with dirt and leaves, are drawn through the vacuum and flow through the normal filter system. Leaves, and other large objects, are caught in the strainer basket and small particles are removed in the filter.

Submitted By: Splash Fiberglass Pools of Maryland

Splash Fiberglass Pools of Maryland serves all of Maryland, Baltimore, Washington DC and Northern Virginia. We specialize in the installation of Viking Fiberglass Swimming Pools and Complete Concrete Swimming Pool Renovations including Tile and Coping, Natural Stone and Paver Decking, Pool Resurfacing with Pebble Tec. Visit Splash Fiberglass Pools of Maryland at www.SplashPoolsMD.com or Contact us at Info@SplashPoolsMD.com or (443) 766-9663.